High efficiency industrial dust suppression-Dry fog system

  The dry fog dust suppression system is that compressed air and water are mixed into the water air atomizing nozzle according to the water air ratio. After the compressed air rushes the spring of the water air atomizing nozzle, it accelerates, sucks water into the acceleration oscillation chamber of the water air atomizing nozzle to crush, and uses the accelerating gas to eject the crushed water mist particles from the nozzle to act on the dust point, so as to achieve the purpose of dust suppression.

1. No suction and exhaust pipes, no dust (sewage) system, low overall investment;

2. High degree of automation, independent research and development of the centralized control system for the domestic initiative, to achieve unattended;

3. Multiple types of nozzles can be used together, and the dust suppression rate can reach more than 98%;

4. The effect of energy saving and consumption reduction is remarkable, which is 85% - 90% and 70% - 85% less than that of general wet power dust collector;

5. The effect of dust control is ideal, and the dust emission point is less than 4mg / m ³， Post dust concentration ≤ 2mg / m ³， There is no secondary pollution, and it really achieves "zero emission";

6. Low operation cost and simple equipment maintenance.