Why Choose the Dry Fog Dust Suppression System？
With the economic development, the steel industry is also developing and the output value is growing, but with the development of the steel industry, there are also many problems. One of them is dust pollution from steel mills. As a factory that integrates sintering, steel making, iron making and steel rolling, dust flying has become a problem that many steel plants cannot avoid. Large amounts of dust can lead to a significant drop in the overall air quality of the plant, affecting the work of workers and not only making the plant work less efficiently, but also having a negative impact on the corporate image. Next, the dust suppression device supplier will share them with you.
Principles of dry fog dust suppression system
The Cangzhou Blue Ocean dry fog dust suppression device is fundamentally a dust suppression system at source. The specific dust suppression principle is that the dry fog particles produced by the dry fog suppression system are able to collide with the dust in the air, thus causing it to settle due to adhesion and other effects. On the whole, the use of the Cangzhou Blue Ocean dry fog dust suppression system in steel mills can achieve a dust suppression effect of more than 95% for the dust in steel mills, especially for the dust below 10 microns.
Dry Fog Dust Suppression Device
On the basis of this dust suppression principle, the dry fog dust suppression system can be used to treat the dust from the source of the different processing stages of the steel mill. In the different processing links of the steel mill, the ultra-fine dry fog nozzles are installed and then the control system of the dry fog host is used to control the different dry fog nozzles to achieve the purpose of dust suppression at source.
When the steel mill is in production and each production is running and carrying material, the dry mist dust suppression system starts spraying or sprays early to form a fog pool. Dust particles moving with the airflow will collide with the water mist particles, contact and bond together and fall. This results in a large amount of fine dust being generated in the enclosed chute and guide chute. This dust suppression operation is carried out by a remote control room operator. This remote console can be operated in either "manual" or "automatic" mode. In automatic mode, the spraying operation is automatically controlled by a programmable logic controller (PLC).
Features of Cangzhou Blue Ocean Dry Fog Dust Suppression System
1. High efficiency of dust suppression: High efficiency in dust suppression, for the 10 micron inhalable dust treatment effect up to 95% or more, to avoid silicosis hazard
2. Low water consumption of the system: small water consumption, material humidity increases by 0.02% - 0.05% by weight, no loss of calorific value of the material (coal), no secondary pollution.
3. Modular design: small footprint, easy to operate, fully automatic touch screen control.
4. Dust suppression at the source: control the spread of dust at the source of dust production
5. Low running costs: dry fog dust suppression system with less electricity, operating costs are greatly reduced
6. Less capital investment: dry fog dust suppression equipment, one-time investment is much lower than other traditional dust removal methods.
If you want to get more information about the dust suppression device for sale, welcome to contact us.
