+86 19131796866 chris@fogsystemco.com

Home / Products / Fog Cannon

  • 60m Fog Cannon Machine fogging machine sprayer disinfection
  • 60m Fog Cannon Machine fogging machine sprayer disinfection
  • 60m Fog Cannon Machine fogging machine sprayer disinfection
  • 60m Fog Cannon Machine fogging machine sprayer disinfection
  • 60m Fog Cannon Machine fogging machine sprayer disinfection
  • 60m Fog Cannon Machine fogging machine sprayer disinfection
  • 60m Fog Cannon Machine fogging machine sprayer disinfection
  • 60m Fog Cannon Machine fogging machine sprayer disinfection
  • 60m Fog Cannon Machine fogging machine sprayer disinfection

60m Fog Cannon Machine fogging machine sprayer disinfection

Share
The LHW-60 fog cannon uses an energy-saving stainless steel vertical centrifugal pump to extend the equipment's continuous working time up to 24 hours.
  • Product Description

Product Description

Dry Fog Systems have been available for many years, and high-quality dry mist dust removal systems can be obtained from Cangzhou Blue Ocean environmental protection equipment suppliers. Although many of these companies claim that the technological innovations they sell are their own, the technology has been around longer than many of these companies. Although we did not claim to have invented the fog-based dust removal process, we do have one of the most complete, easy-to-operate and maintain dry fog systems in the industry today.


The LHW-60 uses an energy-saving stainless steel vertical centrifugal pump to extend the equipment's continuous working time up to 24 hours. It also reduces energy consumption, reduces the flow of liquid pumps. Using a low-flow high-atomization spray system, it increases the atomization rate and reduces liquid waste. The LHW-60 dust spray machine is equipped with a timely system , which means the device is able to start and stop at any time as settled. You only need to set the work time and stop time on the equipment. It makes the use of dust spray machine more timely effective and also reduces labor costs. In the aspect of rotation, PC system is used to control the rotation of the equipment independently, so that the rotation system can swing left and right at any time, farewell to the era of limit switch.The blade uses titanium alloy material. The titanium alloy itself has the characteristics of lightness and corrosion resistance and has always been a favored raw material in the aviation industry.The biggest effect of its use on the dust sprayer is the reduction of noise, and the good dynamic balance when the fan rotates.


Total power29.8kwMax spray range60-65m
Hydraulic pumpCentritugal pump 7.5kwFan powerJet fan 22kw
Horizontal rotation angle320 degreePitch angle-10  - 45 degree
weight of machine860kgDimension of machine2040*2000*1900mm


Like nature, dry fog dust control plays a role in the physical effects of nucleation, agglomeration, and gravity. Volcanoes (or factories) discharge dust into the atmosphere. Condensed water vapor nucleates on very small parts to form a cloud of small droplets. Small droplets gather with most of the dust in the air. Gravity causes the aggregates to rain. In the form of falling.


Nucleation

is the process by which water vapor condenses on very small particles to form water droplets.


Agglomeration

is the process by which droplets collide with particles of similar size to form larger, heavier droplets.

Fog Cannon Machine LHW-60

Advantages

Advantages of dry fog systems:

The reduction efficiency of inhalable PM10 and PM2.5 dust particles is close to 99%

The moisture added to the product is less than 0.5% (volume).

Return available materials to the product flow.

Due to the ultrasonic nozzle design, the maintenance cost is low and it is not easy to be blocked compared with the standard nozzle.

Blue modular design capability for dry fog systems expansion.

The installation cost is low and no expensive factory transformation is required.

FAQ

How does it work?

The blue dry fog system uses a special air atomization nozzle that can generate a very dry mist to condense and remove dust particles from the air from various material handling and processing operations. The DSI system uses compressed air and ordinary water to generate these 1-10 micron droplets (real fog). These ultra-fine water droplets attach (condensate) to airborne dust particles of similar size, sometimes referred to as PM-10 (particulate matter 10 microns or smaller). Subsequently, the slightly moistened dust particles become heavy enough to be removed from the air and fall back into the process. It should be noted that we only wet the dust, not the material. This results in very low water and power consumption, without the need for expensive chemicals or significant wetting of the product (always less than 1/2% by weight, usually no more than zero.


Where does it work?

The dry fog system has been proven to significantly reduce dust from various material handling points, including conveyor transfer points, unloaders, reclaimers, crushers, screening machines, truck dumping areas, rail car loaders, loading and unloading Machine and ash bin unloading trough. The DSI system can meet all requirements for explosion-hazardous areas. It can provide freeze protection for systems that operate at temperatures as low as -35 degrees Fahrenheit. Due to a phenomenon called "cloud physics", the droplets will not freeze due to insufficient quality!


Why choose a fog suppression system?

As you can see, the mist suppression system is more effective than the standard dry air filter. No need to worry about filters, you will also enjoy the following benefits:

Reduce the abrasion of dust and debris on the machine


Safer working environment

Low fire risk

Reduce the risk of explosion

"Breathable" air

Delete
  • wechat

    Chris19131796866: Chris19131796866

Chat with Us