+86 19131796866 chris@fogsystemco.com

Home / News / News

Stacked Sludge Dewatering Machine

Nov. 05, 2021
Share

Working Principle

1. Plate-and-frame sludge dehydration machine: in a closed state, the sludge pumped in by the high-pressure pump is squeezed by the plate frame, so that the water in the sludge is discharged through the filter cloth to achieve the purpose of dehydration.

2. Belt sludge dehydration machine: the sludge layer is entrained by two tensioned filter belts from the top and bottom, and passes through a series of regularly arranged roller cylinders in an s-shape. Relying on the tension of the filter belt it self, the sludge layer is formed. Squeezing and shearing force squeezes out the capillary water in the sludge layer to achieve sludge dehydration.

Stacked Sludge Dewatering Machine

3. Centrifugal sludge dehydration machine: it consists of reprinting and a screw conveyor with a hollow shaft. The sludge is fed into the drum by the hollow shaft. Under the centrifugal force generated by the high-speed rotation, the product is thrown into the drum cavity. Because the specific gravity is different, a solid-liquid separation is formed. The sludge is conveyed to the cone end of the rotating drum and discharged continuously from the outlet under the push of the screw conveyor; the liquid in the liquid ring layer is continuously "overflowed" from the weir orifice and discharged to the outside of the rotating drum by gravity.

Stacked Sludge Dewatering Machine

4. Stacked sludge dehydration machine: the filter body is formed by the fixed ring and the moving ring superimposed on each other, and the screw shaft penetrates through it. The sludge is fully dehydration through gravity concentration and the internal pressure formed by the back pressure plate during the advancing process. The filtrate is discharged from the filter gap formed by the fixed ring and the movable ring, and the mud cake is discharged from the end of the dehydration section.

Stacked Sludge Dewatering Machine

Work Process

1. The sludge in the sludge tank is transported to the metering tank through the sludge transfer pump, and the amount of sludge is adjusted by adjusting the liquid level adjustment tube in the metering tank, and the excess sludge is returned to the sludge tank through the return pipe.

2. The sludge and flocculant are fully mixed in the flocculation mixing tank with a mixer to form alum. The ideal diameter of the alum is about 5mm.

3. The alum flower is concentrated by gravity in the concentration section, and a large amount of filtrate is discharged from the filter slit of the concentration section.

4. The concentrated sludge continues to advance along the direction of rotation of the screw shaft, and is fully dehydrated under the internal pressure formed by the back pressure plate.

Delete
  • wechat

    Chris19131796866: Chris19131796866

Chat with Us